This guide shows you how to reset your Sitecom WL-304 router. A router reset is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. A Router Reset completely erases the router and returns it to factory settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:
- The router's username and password are reset to factory defaults.
- Your WiFi name and password are reset.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Sitecom WL-304 Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the Sitecom WL-304. We also have the following guides for the same router:
Recover Password in Sitecom WL-304
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Sitecom WL-304
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
On most routers you can find a small button on the back or the bottom labeled reset. A typical reset button looks like this:
Your reset button may look different, but usually they are very small. You may need a paper clip to push the reset button.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. It is harmless to hold the reset button too long.
Just don't forget that this will totally reset your Sitecom WL-304 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Sitecom WL-304
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a WL-304 Login Guide with all this information ready for you.
Change Your Password
Be sure to change your router's default password after you get logged back in. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Sitecom WL-304 Guides
We have collected a lot of information about the Sitecom WL-304 router. You can find some of our additional content here.
This is the reset router guide for the Sitecom WL-304. We also have the following guides for the same router: