This article covers how to reset the Sky ER110 router back to factory default settings. This is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. A Router Reset completely erases the router and returns it to factory settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. A router reset will affect the following settings:
- The router's login and password are reset to factory defaults.
- Your WiFi login, password, and network name are reset.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other Sky ER110 Guides
This is the reset router guide for the Sky ER110 2.09.2509.R. We also have the following guides for the same router:
- Sky ER110 2.02.1987.R - Sky ER110 Login Instructions
- Sky ER110 2.02.1987.R - Sky ER110 User Manual
- Sky ER110 2.02.1987.R - Sky ER110 Screenshots
- Sky ER110 2.02.1987.R - Information About the Sky ER110 Router
- Sky ER110 2.02.1987.R - Reset the Sky ER110
Recover Password in Sky ER110
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Sky ER110
Most of the time you can find a small reset button located on either the back or the bottom of a router. What you are looking for is something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Keep in mind that this will completely reset your Sky ER110 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Sky ER110
Once the reset is complete, you need to login to your router using the default IP address, username, and password. Our ER110 Login Guide has all of the information that you need.
Change Your Password
Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other Sky ER110 Guides
We have collected a lot of information about the Sky ER110 router. You can find some of our additional content here.
This is the reset router guide for the Sky ER110 2.09.2509.R. We also have the following guides for the same router:
- Sky ER110 2.02.1987.R - Sky ER110 Login Instructions
- Sky ER110 2.02.1987.R - Sky ER110 User Manual
- Sky ER110 2.02.1987.R - Sky ER110 Screenshots
- Sky ER110 2.02.1987.R - Information About the Sky ER110 Router
- Sky ER110 2.02.1987.R - Reset the Sky ER110