This page shows how to change the LAN IP Address on the Sky SR102 router.
Other Sky SR102 Guides
This is the ip address guide for the Sky SR102 2.1m.3173.R. We also have the following guides for the same router:
- Sky SR102 2.1m.3173.R - Setup WiFi on the Sky SR102
- Sky SR102 2.1m.3173.R - Sky SR102 Login Instructions
- Sky SR102 2.1m.3173.R - Sky SR102 User Manual
- Sky SR102 2.1m.3173.R - Sky SR102 Screenshots
- Sky SR102 2.1m.3173.R - Information About the Sky SR102 Router
- Sky SR102 2.1m.3173.R - Reset the Sky SR102
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Sky SR102
To get started configuring the Sky SR102 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Sky SR102, follow our Sky SR102 Login Guide.
Change the LAN IP Address on a Sky SR102
If you followed our login guide above then you should see this screen.
This IP Address guide begins on the Summary Status page of the Sky SR102 router. Click the option at the top of the page labeled Advanced. Then beneath that choose LAN IP Setup.
Configure the LAN section of your Sky SR102
On this page, the very first setting is titled IP Address. This is the router's IP Address. Go ahead and erase the one that is listed and enter the new one you have decided to use. We recommend ending the new address in a one such as 192.168.1.1 or 10.0.0.1
That's it, no other changes should be made. Just click the Apply button before you exit.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Sky SR102 Info
Don't forget about our other Sky SR102 info that you might be interested in.
This is the ip address guide for the Sky SR102 2.1m.3173.R. We also have the following guides for the same router:
- Sky SR102 2.1m.3173.R - Setup WiFi on the Sky SR102
- Sky SR102 2.1m.3173.R - Sky SR102 Login Instructions
- Sky SR102 2.1m.3173.R - Sky SR102 User Manual
- Sky SR102 2.1m.3173.R - Sky SR102 Screenshots
- Sky SR102 2.1m.3173.R - Information About the Sky SR102 Router
- Sky SR102 2.1m.3173.R - Reset the Sky SR102