How to change the IP Address on a SmartRG SR350N router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the SmartRG SR350N router.

Other SmartRG SR350N Guides

This is the ip address guide for the SmartRG SR350N. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The SmartRG SR350N

To get started configuring the SmartRG SR350N LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the SmartRG SR350N, follow our SmartRG SR350N Login Guide.

Change the LAN IP Address on a SmartRG SR350N

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your SmartRG SR350N router.

Now that you have finished logging into the SmartRG SR350N you are placed on the Device Info page. To change your Router's IP Address, the address you see when inside your local network, click the choice in the green bar on the left labeled Advanced Setup. This brings up a new sub menu, choose LAN from here.

Configure the LAN section of your SmartRG SR350N

router setup
This is the setup page from your SmartRG SR350N router.

You are now on the correct page to change your IP Address. Enter your new address for your router in the box labeled IP Address. One good choice for your SmartRG SR350N is 192.168.0.1

That's all there is to it! Just don't forget to save before you exit. The Apply/Save button is at the bottom of the page.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other SmartRG SR350N Info

Don't forget about our other SmartRG SR350N info that you might be interested in.

This is the ip address guide for the SmartRG SR350N. We also have the following guides for the same router: