We have one SnapGear model in our database, the SG565. It uses 192.168.0.1 as the default IP address, and the default login is root / default. Its default settings are below.
How to Log In to the SnapGear SG565
- Connect a computer or phone to the router, with a network cable or over WiFi.
- Type http://192.168.0.1 into your browser's address bar. If nothing loads, see How To Find Your Router's IP Address.
- Sign in with the default username and password from the table below (root / default for this model).
Default SnapGear IP Address
| SnapGear Model | IP Address |
| SG565 | 192.168.0.1 |
Default SnapGear Username and Password
| SnapGear Model | Username | Password |
|---|---|---|
| SG565 | root | default |
If the Default Login Doesn't Work
Someone has probably changed the password. Check the label on the router, then factory reset it: with the router on, hold the Reset button (often a pinhole, so use a paperclip) for about 10 to 30 seconds, then let go. That puts back the default login above, and also erases your WiFi and Internet settings. See How To Reset Your Router.
More Than Router Guides
To forward ports on a SnapGear router, see our sister site: SnapGear port forwarding guides on Portforward.com.