Here is a list of all the username and password combinations that we are aware of for SnapGear routers.
These are the factory default passwords for SnapGear routers. If you have changed the password in your router, then you need to use the new password that you have set.
This list does not include SnapGear WiFi passwords and will not help you connect to your WiFi network.
How To Login to a SnapGear Router
SnapGear routers have many settings that can be adjusted depending on your needs, such as WiFi network name, password, parental controls, and traffic prioritization. To access these settings, you need to login to your router's built-in firmware.
To access your router's settings, you can use a standard web browser such as Chrome, Firefox, or Edge. It does not matter which web browser you use.
In general, the steps to log in to a SnapGear router are the same no matter which model of router you have. Here's what you do:
- Find your router's internal IP address.
- Put that IP address in your web browser address bar.
- Login with your router's username and password.
We cover all of these steps below, including how to find your router's IP address and a list of all known default SnapGear passwords.
Find Your SnapGear Router's IP Address
To login to your router, you need to know it's IP address. All SnapGear routers have 2 IP addresses, but we are only interested in your router's internal IP address.
- Internal IP address - used for local configuration from inside your network.
- External IP address - used by your friends and coworkers to connect to you from the internet side of things.
Since we are configuring your router from inside your network, we need to know the internal IP address. From here on, for simplicity, we will refer to your router's internal IP address as it's IP address. Just remember that whenever we say IP address, we mean internal IP address.
You can find your router's IP address any of the following ways:
- Try all known SnapGear IP addresses.
- Follow our Find Your Router's Internal IP Address guide.
- Download and install our free Router Detector software.
The simplest way to find your SnapGear IP address is to try all known default IP addresses. Here are all the known default SnapGear IP addresses.
|SnapGear Model||IP Address|
Start with the first IP address in the list and try to login to your router with it. To login to your router, follow the steps outlined below.
If the IP address you picked does not work, then try a different one. It is harmless to try all the listed IP addresses since the only thing that we are doing here is trying to access the firmware settings of your router.
How To Login To a SnapGear Router
Once you have an IP address that you want to try, it's time to use your web browser to log in. Find the address bar in your web browser. It looks something like this:
Type your router's IP address into the address bar and press the Enter key on your keyboard. You should see either your router's home screen or a screen asking for your username and password.
If you do not see anything or you get an error that says This site can't be reached then the IP address that you are trying is wrong. Go back to the list of IP addresses above and try a different one.
If you try all the IP addresses above and still cannot log in, then you can follow our How to Find Your Router's IP Address guide.
SnapGear Default Username and Password
You need to know your SnapGear username and password to login to your router. If you are not sure what your router's username and password are, then your router may still be set to the factory defaults. If your password does not work, you can try all the default SnapGear passwords and see if any of them work. Keep trying them all until you get logged in.
Some routers lock you out after trying too many incorrect passwords. If this happens, then just let it timeout for a minute and try again.
Forgot SnapGear Password
If you have changed your SnapGear password and forgot it, then you have the following choices:
- Try to recover your router's password with Network Utilities Find Password.
- Follow our SnapGear Router Reset guide.
Resetting your router can be a very time-consuming process and may require contacting your ISP to get connected to the internet again. Please do not reset your router until you have tried every other way of getting logged in.