Sparkcom Router Login and Default Password

Thumbnail image of Setup Router Staff
Setup Router Staff
November 09, 2022 (Last Updated: ) | Reading Time: 1 minutes

We have 2 Sparkcom models in our database: the BR41 and R04AC. Most of them use 10.0.0.2 as the default IP address, and the default login is admin / epicrouter. This page has the default IP address and login for each model we know of.

How to Log In to a Sparkcom Router

  1. Connect a computer or phone to the router, with a network cable or over WiFi.
  2. Type http://10.0.0.2 into your browser's address bar. If nothing loads, try the other addresses in the table below.
  3. Sign in with the default username and password from the table below (admin / epicrouter is the most common).

Default Sparkcom IP Addresses

Sparkcom Model IP Address
BR41 192.168.0.1
R04AC 10.0.0.2

Default Sparkcom Username and Password

Sparkcom Model Username Password
BR41 blank blank
R04AC admin epicrouter

Other logins we have seen on Sparkcom models: blank / blank.

If the Default Login Doesn't Work

Someone has probably changed the password. Check the label on the router, then factory reset it: with the router on, hold the Reset button (often a pinhole, so use a paperclip) for about 10 to 30 seconds, then let go. That puts back the default login above, and also erases your WiFi and Internet settings. See How To Reset Your Router.

More Than Router Guides

To forward ports on a Sparkcom router, see our sister site: Sparkcom port forwarding guides on Portforward.com.

Sparkcom Models We Cover

BR41, R04AC