This page shows how to change the LAN IP Address on the Tactio Altera-04G router.
Other Tactio Altera-04G Guides
This is the ip address guide for the Tactio Altera-04G. We also have the following guides for the same router:
- Tactio Altera-04G - Tactio Altera-04G User Manual
- Tactio Altera-04G - Tactio Altera-04G Login Instructions
- Tactio Altera-04G - How to change the DNS settings on a Tactio Altera-04G router
- Tactio Altera-04G - Setup WiFi on the Tactio Altera-04G
- Tactio Altera-04G - Reset the Tactio Altera-04G
- Tactio Altera-04G - Information About the Tactio Altera-04G Router
- Tactio Altera-04G - Tactio Altera-04G Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Tactio Altera-04G
To get started configuring the Tactio Altera-04G LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Tactio Altera-04G, follow our Tactio Altera-04G Login Guide.
Change the LAN IP Address on a Tactio Altera-04G
If you followed our login guide above then you should see this screen.
When you first log into the Tactio Altera-04G you are going to see the Status page of this Router. To change your LAN IP Address, the address you see from inside your network, click the choice at the top of the page labeled Interface Setup, then LAN, below that in the yellow bar.
Configure the LAN section of your Tactio Altera-04G
On this new page, place your cursor in the box labeled IP Address and enter the new address you have picked out for your Router. We would like to recommend using an address such as 192.168.0.1
Please everything else as it is, such as the Subnet Mask, it should always be left at 255.255.255.0
When you are finished making changes, click Save.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Tactio Altera-04G Info
Don't forget about our other Tactio Altera-04G info that you might be interested in.
This is the ip address guide for the Tactio Altera-04G. We also have the following guides for the same router:
- Tactio Altera-04G - Tactio Altera-04G User Manual
- Tactio Altera-04G - Tactio Altera-04G Login Instructions
- Tactio Altera-04G - How to change the DNS settings on a Tactio Altera-04G router
- Tactio Altera-04G - Setup WiFi on the Tactio Altera-04G
- Tactio Altera-04G - Reset the Tactio Altera-04G
- Tactio Altera-04G - Information About the Tactio Altera-04G Router
- Tactio Altera-04G - Tactio Altera-04G Screenshots