This article covers how to reset the Technicolor CGA4131TCH router back to factory default settings. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Before you continue, there are a few things you need to know. The following settings will be changed in your router:
- The router's login and password are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Technicolor CGA4131TCH Guides
This is the reset router guide for the Technicolor CGA4131TCH CGA4131COX-P20-20-A000-c2100r201-220515 Cox. We also have the following guides for the same router:
Recover Password in Technicolor CGA4131TCH
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Technicolor CGA4131TCH
On most routers you can find a small button on the back or the bottom labeled reset. A typical reset button looks like this:
Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Hold the reset button down for 10 seconds and watch the lights. The blinking pattern of the lights on the front of the router should change when the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Keep in mind that this will completely reset your Technicolor CGA4131TCH router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Technicolor CGA4131TCH
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a CGA4131TCH Login Guide with all this information ready for you.
Change Your Password
Do not forget to change your router's default password when you log back into it. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other Technicolor CGA4131TCH Guides
This isn't our only Technicolor CGA4131TCH guide. We also have the following guides for this router.
This is the reset router guide for the Technicolor CGA4131TCH CGA4131COX-P20-20-A000-c2100r201-220515 Cox. We also have the following guides for the same router: