This guide shows you how to reset your Technicolor CGM4981COM router to factory default settings. Resetting a router is different than rebooting a router. Rebooting a router is simply turning it off and back on again. However, when you reset a router you, return it back to its factory default settings.
Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:
- The router's login and password are reset to factory defaults.
- Your WiFi name and password are reset.
- All ISP settings will reset to default, and you may have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Technicolor CGM4981COM Guides
This is the reset router guide for the Technicolor CGM4981COM 5.3p4s2_PROD_sey Xfinity. We also have the following guides for the same router:
Recover Password in Technicolor CGM4981COM
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Technicolor CGM4981COM
On most routers you can find a small button on the back or the bottom labeled reset. Most reset buttons look like this:
Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You can hold the button down as long as you like, it will not hurt anything.
Keep in mind that this will completely reset your Technicolor CGM4981COM router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Technicolor CGM4981COM
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Just follow our CGM4981COM Login Guide to find all of the information that you need.
Change Your Password
Do not forget to change your router's default password when you log back into it. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Technicolor CGM4981COM Guides
This isn't our only Technicolor CGM4981COM guide. We also have the following guides for this router.
This is the reset router guide for the Technicolor CGM4981COM 5.3p4s2_PROD_sey Xfinity. We also have the following guides for the same router: