Reset the Technicolor MediaAccess TG789vac v2 Internode

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

In this article, you will learn how to reset your Technicolor MediaAccess TG789vac v2 Internode back to factory settings. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. This is different from a reset because a reset completely erases all settings from the router.

Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:

  • The router's login and password are reset to factory defaults.
  • All WiFi login information and network names are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Technicolor MediaAccess TG789vac v2 Internode Guides

This is the reset router guide for the Technicolor MediaAccess TG789vac v2 Internode. We also have the following guides for the same router:

Recover Password in Technicolor MediaAccess TG789vac v2 Internode

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

A router reset should be the last thing you try if you are unable to login.

Reset the Technicolor MediaAccess TG789vac v2 Internode

You can usually find a small reset button on either the back or the bottom of a router. What you are looking for is something that looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The blinking pattern of the lights on the front of the router should change when the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Remember, this will totally reset your Technicolor MediaAccess TG789vac v2 Internode router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Technicolor MediaAccess TG789vac v2 Internode

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Just follow our MediaAccess TG789vac v2 Internode Login Guide to find all of the information that you need.

Change Your Password

You need to change your router's default password after you log in for the first time. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Technicolor MediaAccess TG789vac v2 Internode Guides

If you want additional help with your Technicolor MediaAccess TG789vac v2 Internode be sure to check out some of our other guides.

This is the reset router guide for the Technicolor MediaAccess TG789vac v2 Internode. We also have the following guides for the same router: