Setup Router logo in white Setup router name logo in white
Get Software

Reset the Technicolor TG789vac MediaAccess

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the Technicolor TG789vac MediaAccess router. This is not the same thing as rebooting a router. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:

  • The router's login and password are reset to factory defaults.
  • All WiFi information such as network name, password, and authentication method are erased.
  • Your ISP username and password will be reset, and you may have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Technicolor TG789vac MediaAccess Guides

This is the reset router guide for the Technicolor TG789vac MediaAccess. We also have the following guides for the same router:

Recover Password in Technicolor TG789vac MediaAccess

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Technicolor TG789vac MediaAccess

You can usually find a small reset button on either the back or the bottom of a router. A typical reset button looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. Sometimes the button is under a pinhole, and you need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. The lights on the front of the router should do something different when the reset happens. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Remember, this will erase everything you have previously done to this Technicolor TG789vac MediaAccess router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Technicolor TG789vac MediaAccess

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the TG789vac MediaAccess Login Guide to find everything that you need to log in.

Change Your Password

After logging in, you should really change your router's password for added security. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other Technicolor TG789vac MediaAccess Guides

We have collected a lot of information about the Technicolor TG789vac MediaAccess router. You can find some of our additional content here.

This is the reset router guide for the Technicolor TG789vac MediaAccess. We also have the following guides for the same router: