Reset the Technicolor TG789vac v2 MediaAccess iiNet

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Technicolor TG789vac v2 MediaAccess iiNet router. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:

  • The router's username and password are reset.
  • Your WiFi name and password are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Technicolor TG789vac v2 MediaAccess iiNet Guides

This is the reset router guide for the Technicolor TG789vac v2 MediaAccess iiNet. We also have the following guides for the same router:

Recover Password in Technicolor TG789vac v2 MediaAccess iiNet

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Technicolor TG789vac v2 MediaAccess iiNet

Most of the time you can find a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. It is harmless to hold the reset button too long.

Just don't forget that this will totally reset your Technicolor TG789vac v2 MediaAccess iiNet router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Technicolor TG789vac v2 MediaAccess iiNet

Now you need to log in using the factory default username and password. Our TG789vac v2 MediaAccess iiNet Login Guide has all of the information that you need.

Change Your Password

Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Technicolor TG789vac v2 MediaAccess iiNet Guides

We have collected a lot of information about the Technicolor TG789vac v2 MediaAccess iiNet router. You can find some of our additional content here.

This is the reset router guide for the Technicolor TG789vac v2 MediaAccess iiNet. We also have the following guides for the same router: