This is the reset guide for the Telekom Speedport W 925 V router. This is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:
- The router's username and password are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- All ISP settings will reset to default, and you may have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Telekom Speedport W 925 V Guides
This is the reset router guide for the Telekom Speedport W 925 V 1.00 (DE). We also have the following guides for the same router:
Recover Password in Telekom Speedport W 925 V
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Telekom Speedport W 925 V
On most routers you can find a small button on the back or the bottom labeled reset. A typical reset button looks like this:
Yours may look slightly different, but they are usually tiny. You may need a paper clip to push the reset button.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You can hold the button down as long as you like, it will not hurt anything.
Don't forget, this step will totally reset your Telekom Speedport W 925 V router back to factory settings.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Telekom Speedport W 925 V
Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a Speedport W 925 V Login Guide with all this information ready for you.
Change Your Password
You need to change your router's default password after you log in for the first time. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Telekom Speedport W 925 V Guides
If you want additional help with your Telekom Speedport W 925 V be sure to check out some of our other guides.
This is the reset router guide for the Telekom Speedport W 925 V 1.00 (DE). We also have the following guides for the same router: