This guide shows you how to reset your Telstra TG800VAC router to factory default settings. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: This is not a step to be taken lightly. The following settings in your router will be changed:
- The router's login and password are reset.
- All WiFi settings are reset, including network name and password.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Telstra TG800VAC Guides
Use a VPN
Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the Telstra TG800VAC. We also have the following guides for the same router:
Recover Password in Telstra TG800VAC
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Telstra TG800VAC
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
On most routers you can find a small button on the back or the bottom labeled reset. A typical reset button looks like this:
Even though yours may look slightly different, you need to look for a tiny button. You may need a paper clip to push the reset button.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. It is harmless to hold the reset button too long.
Just don't forget that this will totally reset your Telstra TG800VAC router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Telstra TG800VAC
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can find all of the information that you need in our TG800VAC Login Guide.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. The factory default passwords for routers are very well known. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Telstra TG800VAC Guides
We have collected a lot of information about the Telstra TG800VAC router. You can find some of our additional content here.
This is the reset router guide for the Telstra TG800VAC. We also have the following guides for the same router: