Setup Router logo in white Setup router name logo in white
Get Software

Reset the Teltonika RUT950

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Teltonika RUT950 router. This is a much bigger deal than a router reboot. A reboot happens every time a router loses power. A Router Reset completely erases the router and returns it to factory settings.

Warning: This is not a step to be taken lightly. The following settings will be changed in your router:

  • The router's login credentials are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

Resetting your router should be considered the last step. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Teltonika RUT950 Guides

This is the reset router guide for the Teltonika RUT950 RUT9XX_R_00.02.566. We also have the following guides for the same router:

Recover Password in Teltonika RUT950

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Teltonika RUT950

You can usually find a small reset button on either the back or the bottom of a router. A typical reset button looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not worry about holding the button down too long; this is harmless.

Remember, this will erase everything you have previously done to this Teltonika RUT950 router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Teltonika RUT950

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Just follow our RUT950 Login Guide to find all of the information that you need.

Change Your Password

Do not forget to change your router's default password when you log back into it. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Teltonika RUT950 Guides

If you want additional help with your Teltonika RUT950 be sure to check out some of our other guides.

This is the reset router guide for the Teltonika RUT950 RUT9XX_R_00.02.566. We also have the following guides for the same router: