This is the reset guide for the Tenda AC6 router. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. This is different from a reset because a reset completely erases all settings from the router.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. When you reset your router, the following will happen.
- The router's login credentials are reset to factory defaults.
- Your WiFi name and password are reset.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Tenda AC6 Guides
This is the reset router guide for the Tenda AC6 v15.03.06.50_multi. We also have the following guides for the same router:
Recover Password in Tenda AC6
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Tenda AC6
Usually there is a reset button located on the back or bottom of a router. Look for something that looks like this:
Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Keep in mind that this will completely reset your Tenda AC6 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Tenda AC6
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can find all of the information that you need in our AC6 Login Guide.
Change Your Password
Do not forget to change your router's default password when you log back into it. The factory default passwords for routers are very well known. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Tenda AC6 Guides
If you want additional help with your Tenda AC6 be sure to check out some of our other guides.
This is the reset router guide for the Tenda AC6 v15.03.06.50_multi. We also have the following guides for the same router: