This guide shows you how to reset your Thomson Alcatel TG784 router. This is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. However, when you reset a router you, return it back to its factory default settings.
Warning: This is not a step to be taken lightly. A router reset will affect the following settings:
- The router's login and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- All ISP settings will reset to default, and you may have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
Resetting your router should be considered the last step. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Thomson Alcatel TG784 Guides
This is the reset router guide for the Thomson Alcatel TG784. We also have the following guides for the same router:
Recover Password in Thomson Alcatel TG784
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Thomson Alcatel TG784
Most of the time you can find a small reset button located on either the back or the bottom of a router. Look at your router and try to find something that looks like this:
Your reset button may look different, but usually they are very small. You may need a paper clip to push the reset button.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. The lights on the front of the router should do something different when the reset happens. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will totally reset your Thomson Alcatel TG784 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Thomson Alcatel TG784
Once the reset is complete, you need to login to your router using the default IP address, username, and password. Just follow our TG784 Login Guide to find all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Thomson Alcatel TG784 Guides
If you want additional help with your Thomson Alcatel TG784 be sure to check out some of our other guides.
This is the reset router guide for the Thomson Alcatel TG784. We also have the following guides for the same router: