This guide shows you how to reset your Totolink N151RA router. Resetting a router is different than rebooting a router. Unplugging a router from the wall reboots it. However, when you reset a router you, return it back to its factory default settings.
Warning: This is not a step to be taken lightly. The following settings will be changed in your router:
- The router's username and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Totolink N151RA Guides
This is the reset router guide for the Totolink N151RA. We also have the following guides for the same router:
- Totolink N151RA - How to change the IP Address on a Totolink N151RA router
- Totolink N151RA - Totolink N151RA Login Instructions
- Totolink N151RA - Totolink N151RA User Manual
- Totolink N151RA - Setup WiFi on the Totolink N151RA
- Totolink N151RA - Totolink N151RA Screenshots
- Totolink N151RA - Information About the Totolink N151RA Router
Recover Password in Totolink N151RA
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
A router reset should be the last thing you try if you are unable to login.
Reset the Totolink N151RA
You can usually find a small reset button on either the back or the bottom of a router. A typical reset button looks like this:
Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not worry about holding the button down too long; this is harmless.
Remember, this will totally reset your Totolink N151RA router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Totolink N151RA
After you are finished resetting your router, you need to login in using the original factory username and password. You can follow the N151RA Login Guide to find everything that you need to log in.
Change Your Password
You need to change your router's default password after you log in for the first time. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Totolink N151RA Guides
If you want additional help with your Totolink N151RA be sure to check out some of our other guides.
This is the reset router guide for the Totolink N151RA. We also have the following guides for the same router:
- Totolink N151RA - How to change the IP Address on a Totolink N151RA router
- Totolink N151RA - Totolink N151RA Login Instructions
- Totolink N151RA - Totolink N151RA User Manual
- Totolink N151RA - Setup WiFi on the Totolink N151RA
- Totolink N151RA - Totolink N151RA Screenshots
- Totolink N151RA - Information About the Totolink N151RA Router