Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Totolink N605RDG router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Totolink N605RDG router.

Other Totolink N605RDG Guides

This is the ip address guide for the Totolink N605RDG. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Totolink N605RDG

To get started configuring the Totolink N605RDG LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Totolink N605RDG, follow our Totolink N605RDG Login Guide.

Change the LAN IP Address on a Totolink N605RDG

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Totolink N605RDG router.

Now that you have finished logging into the Totolink N605RDG router you should see the System Status page.

To change the LAN IP address (the router's IP address) click the option in the left sidebar labeled Network. Then under that click the option of LAN Interface.

Configure the LAN section of your Totolink N605RDG

router IP address lan home network
This is the lan page from your Totolink N605RDG router.

You should now see the page above on your screen.

To change your router's IP address enter the new address you want to use in the box labeled IP Address. Remember it's easier to remember if you end this number in a 1 such as 10.0.0.1 or 192.168.1.1

Don't make any other changes to this router. Simply click the Apply button when you are finished.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Totolink N605RDG Info

Don't forget about our other Totolink N605RDG info that you might be interested in.

This is the ip address guide for the Totolink N605RDG. We also have the following guides for the same router: