This page shows you how to login to the TP-Link Archer A10 v2.0 router.
Other TP-Link Archer A10 v2.0 Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the login guide for the TP-Link Archer A10 v2.0 1.0.0. We also have the following guides for the same router:
Find Your TP-Link Archer A10 v2.0 Router IP Address
The first thing that we need to know in order to login to the TP-Link Archer A10 v2.0 router is it's internal IP address.
| Known Archer A10 v2.0 IP Addresses |
|---|
| 192.168.0.1 |
| http://tplinkwifi.net/ |
You may have to try using a few different IP addresses from the list above. Just pick one and then follow the rest of this guide.
If you do not find your router's interface later in this guide, then try a different IP address. Keep trying different IP addresses until you find your router. It is harmless to try different IP addresses.
If, after trying all of the above IP addresses, you still cannot find your router, then you have the following options:
- Use our Find Your Router's Internal IP Address guide.
- Download and install our free Router Detector software.
Once you have the internal IP Address of your router, you can log in to it.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Login to the TP-Link Archer A10 v2.0 Router
The TP-Link Archer A10 v2.0 is managed through a web-based interface. The way you manage it is by using a web browser like Firefox, Edge, or Chrome.
Enter TP-Link Archer A10 v2.0 Internal IP Address
Either copy/paste or type the internal IP address of your TP-Link Archer A10 v2.0 router into the address bar of your web browser. Your address bar should look something like this:
Press the Enter key on your keyboard. You will see a window asking for your TP-Link Archer A10 v2.0 password.
TP-Link Archer A10 v2.0 Default Username and Password
You need to know your username and password to login to your TP-Link Archer A10 v2.0. Just in case the router's username and password have never been changed, you may want to try the factory defaults. All of the default usernames and passwords for the TP-Link Archer A10 v2.0 are listed below.
| TP-Link Archer A10 v2.0 Default Usernames and Passwords | |
|---|---|
| Username | Password |
| none | created during initial setup |
Enter your username and password in the window that pops up. Keep trying them all until you get logged in.
TP-Link Archer A10 v2.0 Home Screen
After you get logged in you should see the TP-Link Archer A10 v2.0 home screen, which looks like this:
When you see this screen, then you are logged in to your TP-Link Archer A10 v2.0 router. You are ready to follow any of our other guides for this router.
Solutions To TP-Link Archer A10 v2.0 Login Problems
If you are having problems getting logged in to your router, here are a few ideas for you to try.
TP-Link Archer A10 v2.0 Password Doesn't Work
It's possible that your router's factory default password is different than what we have listed. You can try other TP-Link passwords. Head over to our list of all TP-Link Passwords.
Forgot Password to TP-Link Archer A10 v2.0 Router
If your Internet Service Provider supplied you with your router, then you might want to try giving them a call and see if they either know what your router's username and password are, or maybe they can reset it for you.
How to Reset the TP-Link Archer A10 v2.0 Router To Default Settings
If all else fails and you are unable to login to your router, then you may have to reset it to its factory default settings. You can follow our How To Reset your Router guide for help.
Other TP-Link Archer A10 v2.0 Guides
Here are some of our other TP-Link Archer A10 v2.0 info that you might be interested in.
This is the login guide for the TP-Link Archer A10 v2.0 1.0.0. We also have the following guides for the same router: