If you need to login to the TP-Link Archer AX20 v2.0 router, then this guide shows you how.
Other TP-Link Archer AX20 v2.0 Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the login guide for the TP-Link Archer AX20 v2.0 2.1.1. We also have the following guides for the same router:
Find Your TP-Link Archer AX20 v2.0 Router IP Address
In order to login to the TP-Link Archer AX20 v2.0 router, we need to know it's internal IP address.
| Known Archer AX20 v2.0 IP Addresses |
|---|
| 192.168.0.1 |
| http://tplinkwifi.net/ |
Start with the first IP address in the list and then follow the rest of this guide.
If the IP address you picked does not seem to work, then simply try a different one. It is harmless to try different IP addresses.
If you try all of the above IP addresses and still cannot find your router, then do one of the following:
- Follow our Find Your Router's Internal IP Address guide.
- Download and install our free Router Detector software.
The next step is to try logging in to your router.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Login to the TP-Link Archer AX20 v2.0 Router
Your TP-Link Archer AX20 v2.0 is managed through a web-based interface. You can manage it by using a web browser such as Chrome, Firefox, or Edge.
Enter TP-Link Archer AX20 v2.0 Internal IP Address
Either copy/paste or type the internal IP address of your TP-Link Archer AX20 v2.0 router into the address bar of your web browser. The address bar will look like this:
Press the Enter key on your keyboard. You will be prompted for your TP-Link Archer AX20 v2.0 password.
TP-Link Archer AX20 v2.0 Default Username and Password
In order to login to your TP-Link Archer AX20 v2.0 you are going to need to know your username and password. If you are not sure what the username and password are, then perhaps they are still set to the factory defaults. All of the default usernames and passwords for the TP-Link Archer AX20 v2.0 are listed below.
| TP-Link Archer AX20 v2.0 Default Usernames and Passwords | |
|---|---|
| Username | Password |
| none | created during initial setup |
In the window that pops up, enter your username and password. You should be able to try them all.
TP-Link Archer AX20 v2.0 Home Screen
Once you are logged in you will see the TP-Link Archer AX20 v2.0 home screen, like this:
If you see this screen, then good job, you are now logged in to your TP-Link Archer AX20 v2.0 router. At this point, you can follow any of our other guides for this router.
Solutions To TP-Link Archer AX20 v2.0 Login Problems
If things are not going right and you are unable to login to your router, then here are some other things that you can try.
TP-Link Archer AX20 v2.0 Password Doesn't Work
Your router's factory default password might be different than what we have listed here. Be sure to try other TP-Link passwords. We have an extensive list of all TP-Link Passwords that you can try.
Forgot Password to TP-Link Archer AX20 v2.0 Router
If your ISP provided your router, then you may have to call them and ask them if they know how to login to your router. Sometimes they will have your password on file.
How to Reset the TP-Link Archer AX20 v2.0 Router To Default Settings
The last option when you are unable to get logged in to your router is to reset it to the factory defaults. Our How To Reset your Router guide can help you reset your router to factory defaults.
Other TP-Link Archer AX20 v2.0 Guides
Here are some of our other TP-Link Archer AX20 v2.0 info that you might be interested in.
This is the login guide for the TP-Link Archer AX20 v2.0 2.1.1. We also have the following guides for the same router: