This guide shows you how to reset your TP-Link Archer AX90 router to factory default settings. This is not the same thing as rebooting a router. A reboot happens every time a router loses power. A Router Reset completely erases the router and returns it to factory settings.
Warning: Proceed with caution; resetting your router can be a major headache. The following settings will be changed in your router:
- The router's login and password are reset to factory defaults.
- All WiFi settings are reset, including network name and password.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other TP-Link Archer AX90 Guides
This is the reset router guide for the TP-Link Archer AX90 1.1.10. We also have the following guides for the same router:
Recover Password in TP-Link Archer AX90
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the TP-Link Archer AX90
You can usually find a small reset button on either the back or the bottom of a router. A typical reset button looks like this:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will erase everything you have previously done to this TP-Link Archer AX90 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the TP-Link Archer AX90
Now you need to log in using the factory default username and password. Just follow our Archer AX90 Login Guide to find all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other TP-Link Archer AX90 Guides
We have collected a lot of information about the TP-Link Archer AX90 router. You can find some of our additional content here.
This is the reset router guide for the TP-Link Archer AX90 1.1.10. We also have the following guides for the same router: