This page shows how to change the LAN IP Address on the TP-Link Archer D9 v2 router.
Other TP-Link Archer D9 v2 Guides
This is the ip address guide for the TP-Link Archer D9 v2. We also have the following guides for the same router:
- TP-Link Archer D9 v2 - TP-Link Archer D9 v2 Login Instructions
- TP-Link Archer D9 v2 - TP-Link Archer D9 v2 User Manual
- TP-Link Archer D9 v2 - Setup WiFi on the TP-Link Archer D9 v2
- TP-Link Archer D9 v2 - TP-Link Archer D9 v2 Screenshots
- TP-Link Archer D9 v2 - Information About the TP-Link Archer D9 v2 Router
- TP-Link Archer D9 v2 - Reset the TP-Link Archer D9 v2
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The TP-Link Archer D9 v2
To get started configuring the TP-Link Archer D9 v2 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the TP-Link Archer D9 v2, follow our TP-Link Archer D9 v2 Login Guide.
Change the LAN IP Address on a TP-Link Archer D9 v2
If you followed our login guide above then you should see this screen.
Once you have logged into the TP-Link Archer D9 v2 router you should see the Network Map.
To change the router's IP address click the option of Advanced. Then Network in the left sidebar. Finally click the link labeled LAN Settings.
Configure the LAN section of your TP-Link Archer D9 v2
On this page the only setting you need to change is the IP Address. This is the router's IP address. We recommend ending the address in a one for easier recall. Some options you can use are 10.0.0.1 or 192.168.0.1
That's it, just click the green Save button when you are finished.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other TP-Link Archer D9 v2 Info
Don't forget about our other TP-Link Archer D9 v2 info that you might be interested in.
This is the ip address guide for the TP-Link Archer D9 v2. We also have the following guides for the same router:
- TP-Link Archer D9 v2 - TP-Link Archer D9 v2 Login Instructions
- TP-Link Archer D9 v2 - TP-Link Archer D9 v2 User Manual
- TP-Link Archer D9 v2 - Setup WiFi on the TP-Link Archer D9 v2
- TP-Link Archer D9 v2 - TP-Link Archer D9 v2 Screenshots
- TP-Link Archer D9 v2 - Information About the TP-Link Archer D9 v2 Router
- TP-Link Archer D9 v2 - Reset the TP-Link Archer D9 v2