If you need to login to the TP-Link Archer MR400 v4 router, then this guide shows you how.
Other TP-Link Archer MR400 v4 Guides
This is the login guide for the TP-Link Archer MR400 v4 1.3.0 0.9.1 v0001.0. We also have the following guides for the same router:
Find Your TP-Link Archer MR400 v4 Router IP Address
In order to login to the TP-Link Archer MR400 v4 router, we need to know it's internal IP address.
| Known Archer MR400 v4 IP Addresses |
|---|
| 192.168.1.1 |
| http://tplinkmodem.net/ |
You may have to try using a few different IP addresses from the list above. Just pick one and then follow the rest of this guide.
If the IP address you picked does not seem to work, then simply try a different one. It should be completely harmless to try different IP addresses.
If, after trying all of the above IP addresses, you still cannot find your router, then you can try one of the following steps:
- Use our Find Your Router's Internal IP Address guide.
- Use our free Router Detector software.
The next step is to try logging in to your router.
Login to the TP-Link Archer MR400 v4 Router
The TP-Link Archer MR400 v4 router has a web-based interface. The way you manage it is by using a web browser like Firefox, Edge, or Chrome.
Enter TP-Link Archer MR400 v4 Internal IP Address
Find the address bar in your web browser and type in the internal IP address of your TP-Link Archer MR400 v4 router. Your address bar should look something like this:
Press the Enter key on your keyboard. A window will show asking for your TP-Link Archer MR400 v4 password.
TP-Link Archer MR400 v4 Default Username and Password
You need to know your username and password to login to your TP-Link Archer MR400 v4. Just in case the router's username and password have never been changed, you may want to try the factory defaults. Below is a list of all known TP-Link Archer MR400 v4 default usernames and passwords.
| TP-Link Archer MR400 v4 Default Usernames and Passwords | |
|---|---|
| Username | Password |
| none | created during initial setup |
Put your username and password in the appropriate boxes. Keep trying them all until you get logged in.
TP-Link Archer MR400 v4 Home Screen
When you get logged in you should be at the TP-Link Archer MR400 v4 home screen, which looks similar to this:
When you see this screen, then you are logged in to your TP-Link Archer MR400 v4 router. You are ready to follow any of our other guides for this router.
Solutions To TP-Link Archer MR400 v4 Login Problems
Here are some other ideas that might help you get logged in to your router.
TP-Link Archer MR400 v4 Password Doesn't Work
Perhaps your router's default password is different than what we have listed here. Start by trying all of the other known TP-Link passwords. Here is our list of all TP-Link Passwords.
Forgot Password to TP-Link Archer MR400 v4 Router
If you are using an ISP provided router, then you may need to call their support desk and ask for your login information. Most of the time they will have it on file for you.
How to Reset the TP-Link Archer MR400 v4 Router To Default Settings
If you still cannot get logged in, then you are probably going to have to reset your router to its default settings. You can follow our How To Reset your Router guide for help.
Other TP-Link Archer MR400 v4 Guides
Here are some of our other TP-Link Archer MR400 v4 info that you might be interested in.
This is the login guide for the TP-Link Archer MR400 v4 1.3.0 0.9.1 v0001.0. We also have the following guides for the same router: