This is the reset guide for the TP-Link TD-W8901G router. A router reset is very different than a router reboot. Unplugging a router from the wall reboots it. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Before you continue, there are a few things you need to know. The following settings in your router will be changed:
- The router's login and password are reset.
- All WiFi login information and network names are reset.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other TP-Link TD-W8901G Guides
This is the reset router guide for the TP-Link TD-W8901G. We also have the following guides for the same router:
Recover Password in TP-Link TD-W8901G
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the TP-Link TD-W8901G
Usually there is a reset button located on the back or bottom of a router. What you are looking for is something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Hold the reset button down for 10 seconds and watch the lights. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Just don't forget that this will totally reset your TP-Link TD-W8901G router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the TP-Link TD-W8901G
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a TD-W8901G Login Guide with all this information ready for you.
Change Your Password
You need to change your router's default password after you log in for the first time. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other TP-Link TD-W8901G Guides
We have collected a lot of information about the TP-Link TD-W8901G router. You can find some of our additional content here.
This is the reset router guide for the TP-Link TD-W8901G. We also have the following guides for the same router: