Setup Router logo in white Setup router name logo in white
Get Software

Reset the TP-Link TD864W

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the TP-Link TD864W router back to factory default settings. Resetting a router is different than rebooting a router. Turning a router off and back on again causes a reboot. A Router Reset completely erases the router and returns it to factory settings.

Warning: Make sure that you fully understand the following before resetting your router. The following settings in your router will be changed:

  • The router's login and password are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • Your ISP username and password will be reset, and you may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other TP-Link TD864W Guides

This is the reset router guide for the TP-Link TD864W. We also have the following guides for the same router:

Recover Password in TP-Link TD864W

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the TP-Link TD864W

Usually there is a reset button located on the back or bottom of a router. Look for something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Remember, this will totally reset your TP-Link TD864W router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the TP-Link TD864W

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Our TD864W Login Guide has all of the information that you need.

Change Your Password

After logging in, you should really change your router's password for added security. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other TP-Link TD864W Guides

This isn't our only TP-Link TD864W guide. We also have the following guides for this router.

This is the reset router guide for the TP-Link TD864W. We also have the following guides for the same router: