In this article, you will learn how to reset your TP-Link TL-WR841N v12 back to factory settings. A router reset is very different than a router reboot. Rebooting a router is simply turning it off and back on again. A Router Reset completely erases the router and returns it to factory settings.
Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:
- The router's username and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other TP-Link TL-WR841N v12 Guides
This is the reset router guide for the TP-Link TL-WR841N v12 3.16.9. We also have the following guides for the same router:
Recover Password in TP-Link TL-WR841N v12
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the TP-Link TL-WR841N v12
Usually there is a reset button located on the back or bottom of a router. Most reset buttons look like this:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Remember, this will totally reset your TP-Link TL-WR841N v12 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the TP-Link TL-WR841N v12
Once the reset is complete, you need to login to your router using the default IP address, username, and password. Just follow our TL-WR841N v12 Login Guide to find all of the information that you need.
Change Your Password
You need to change your router's default password after you log in for the first time. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other TP-Link TL-WR841N v12 Guides
This isn't our only TP-Link TL-WR841N v12 guide. We also have the following guides for this router.
This is the reset router guide for the TP-Link TL-WR841N v12 3.16.9. We also have the following guides for the same router: