Setup Router logo in white Setup router name logo in white
Get Software

Reset the TP-Link TL-WR941ND

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your TP-Link TL-WR941ND router. This is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:

  • The router's login credentials are reset to factory defaults.
  • Your WiFi login, password, and network name are reset.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • All parental controls, firewall settings, and port forwards will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other TP-Link TL-WR941ND Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the reset router guide for the TP-Link TL-WR941ND. We also have the following guides for the same router:

Recover Password in TP-Link TL-WR941ND

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the TP-Link TL-WR941ND

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

There is usually a small reset button located on either the back or the bottom of a router. Look at your router and try to find something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Remember, this will totally reset your TP-Link TL-WR941ND router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the TP-Link TL-WR941ND

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Our TL-WR941ND Login Guide has all of the information that you need.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other TP-Link TL-WR941ND Guides

We have collected a lot of information about the TP-Link TL-WR941ND router. You can find some of our additional content here.

This is the reset router guide for the TP-Link TL-WR941ND. We also have the following guides for the same router: