How to change the DNS settings on a Trendnet TE100-MP2U router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

This page shows how to change the DNS settings on the Trendnet TE100-MP2U router.

Other Trendnet TE100-MP2U Guides

This is the dns guide for the Trendnet TE100-MP2U. We also have the following guides for the same router:

What is the DNS setting on a Router

When you connect a router to the Internet it gets a few settings from your ISP automatically. One of the settings that the ISP sets in your router is the DNS setting. DNS stands for Domain Name System and it is used to convert Internet names into actual IP addresses. For instance, when you go to "", your are really connecting to an IP address that is mapped through DNS to a number such as:


This mapping happens automatically every time you visit any page on the Internet.

Why Change Your Router's DNS Setting

Some ISPs choose to abuse the DNS system and map unknown names to servers that they control. This can be done in a way that you don't know it is happening since your router is getting its DNS settings from your ISP. For instance, if you have one of these ISPs who is hijacking your DNS, and you try to surf the web to "" and "" does not exist, you might get a page back from your ISP with local advertisements on it.

By changing your DNS setting in your router you will effectively change the DNS setting for every computer on your network. This is because when a device is connected to your network your router automatically hands out its own DNS settings to that device. This way you can protect your entire network from ISP hijacking with just one setting.

What Should I Change My DNS To

There are 2 really great DNS servers on the Internet that you can choose from right now: Google Public DNS and OpenDNS. If you are not sure which one to pick then just use Google Public DNS.

When you change the DNS settings in your router, you usually have to enter a Primary and a Secondary setting. The secondary is only used if the primary can not be located. Here are common settings:

If you want to use Google Public DNS, use the following settings:

  • Primary:
  • Secondary:

If you want to use OpenDNS, use the following settings:


Login To The Trendnet TE100-MP2U

To get started configuring the Trendnet TE100-MP2U DNS page you need to login to your router. If you are already logged in you can skip this step.

To login to the Trendnet TE100-MP2U, follow our Trendnet TE100-MP2U Login Guide.

Change the DNS settings on a Trendnet TE100-MP2U

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Trendnet TE100-MP2U router.

The first page is the Home page of the TRENDnet TE100-MP2U router. To change the Domain Name System settings click the link on the left hand side of the page labeled Configuration and below that, TCP/IP.

Configure the DNS section of your Trendnet TE100-MP2U

router setup
This is the setup page from your Trendnet TE100-MP2U router.

You should now be on the TCP/IP Configuration page of the TRENDnet TE100-MP2U.

If the radio button titled Automatically get IP by DHCP is ticked, then tick the box that reads Manual DNS. Enter the main address of the DNS server you wish to use in the box provided.

If you have selected the radio button that reads Static IP, then you enter the main address of the DNS server in the box labeled DNS Server.

That's all there is to it, simply click the Submit button before exiting.

Possible Problems when Changing your DNS settings

Most devices on your network will not begin using the new DNS settings until they have been rebooted. After rebooting a device you can go to it's network settings and verify that it is using the DNS servers that you specified.

Other Trendnet TE100-MP2U Info

Don't forget about our other Trendnet TE100-MP2U info that you might be interested in.

This is the dns guide for the Trendnet TE100-MP2U. We also have the following guides for the same router: