Reset the Trendnet TE100-P11

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the Trendnet TE100-P11 router. A router reset is very different than a router reboot. Rebooting a router is simply turning it off and back on again. However, when you reset a router you, return it back to its factory default settings.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:

  • The router's login credentials are reset.
  • Your WiFi name and password are reset.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Trendnet TE100-P11 Guides

This is the reset router guide for the Trendnet TE100-P11. We also have the following guides for the same router:

Recover Password in Trendnet TE100-P11

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Trendnet TE100-P11

You can usually find a small reset button on either the back or the bottom of a router. A typical reset button looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for 10 seconds and watch the lights. The blinking pattern of the lights on the front of the router should change when the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Keep in mind that this will completely reset your Trendnet TE100-P11 router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the Trendnet TE100-P11

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Our TE100-P11 Login Guide has all of the information that you need.

Change Your Password

Do not forget to change your router's default password when you log back into it. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Trendnet TE100-P11 Guides

We have collected a lot of information about the Trendnet TE100-P11 router. You can find some of our additional content here.

This is the reset router guide for the Trendnet TE100-P11. We also have the following guides for the same router: