Reset the Trendnet TEG-240WS

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the Trendnet TEG-240WS router. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: This is not a step to be taken lightly. The following settings will be changed in your router:

  • The router's login credentials are reset to factory defaults.
  • Your WiFi name and password are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Trendnet TEG-240WS Guides

This is the reset router guide for the Trendnet TEG-240WS. We also have the following guides for the same router:

Recover Password in Trendnet TEG-240WS

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Trendnet TEG-240WS

On most routers you can find a small button on the back or the bottom labeled reset. This is what a typical reset button looks like:

Router Reset Button

Your reset button may look different, but usually they are very small. Sometimes the button is under a pinhole, and you need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. It is harmless to hold the reset button too long.

Remember, this will erase everything you have previously done to this Trendnet TEG-240WS router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Trendnet TEG-240WS

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Our TEG-240WS Login Guide has all of the information that you need.

Change Your Password

After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Trendnet TEG-240WS Guides

This isn't our only Trendnet TEG-240WS guide. We also have the following guides for this router.

This is the reset router guide for the Trendnet TEG-240WS. We also have the following guides for the same router: