Setup Router logo in white Setup router name logo in white
Get Software

Reset the Trendnet TEG-S2400i

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Trendnet TEG-S2400i router. A router reset is very different than a router reboot. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: This is not a step to be taken lightly. The following settings in your router will be changed:

  • The router's username and password are reset to factory defaults.
  • Your WiFi login, password, and network name are reset.
  • Your ISP username and password will be reset, and you may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Trendnet TEG-S2400i Guides

This is the reset router guide for the Trendnet TEG-S2400i. We also have the following guides for the same router:

Recover Password in Trendnet TEG-S2400i

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Trendnet TEG-S2400i

You can usually find a small reset button on either the back or the bottom of a router. Look at your router and try to find something that looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Remember, this will erase everything you have previously done to this Trendnet TEG-S2400i router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the Trendnet TEG-S2400i

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Our TEG-S2400i Login Guide has all of the information that you need.

Change Your Password

You need to change your router's default password after you log in for the first time. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Trendnet TEG-S2400i Guides

We have collected a lot of information about the Trendnet TEG-S2400i router. You can find some of our additional content here.

This is the reset router guide for the Trendnet TEG-S2400i. We also have the following guides for the same router: