Setup Router logo in white Setup router name logo in white
Get Software

Reset the Trendnet TEW-435BRM

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 5 minutes

In this article, you will learn how to reset your Trendnet TEW-435BRM back to factory settings. Resetting a router is different than rebooting a router. Rebooting a router is simply turning it off and back on again. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.

  • The router's login and password are reset to factory defaults.
  • All WiFi login information and network names are reset.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any parental controls, firewall settings, or port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Trendnet TEW-435BRM Guides

This is the reset router guide for the Trendnet TEW-435BRM v2. We also have the following guides for the same router:

Recover Password in Trendnet TEW-435BRM

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Trendnet TEW-435BRM

On most routers you can find a small button on the back or the bottom labeled reset. What you are looking for is something that looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Remember, this will totally reset your Trendnet TEW-435BRM router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Trendnet TEW-435BRM

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can find all of the information that you need in our TEW-435BRM Login Guide.

Change Your Password

After logging in, you should really change your router's password for added security. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Trendnet TEW-435BRM Guides

If you want additional help with your Trendnet TEW-435BRM be sure to check out some of our other guides.

This is the reset router guide for the Trendnet TEW-435BRM v2. We also have the following guides for the same router: