Reset the Trendnet TV-IP100W-Nv3

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the Trendnet TV-IP100W-Nv3 router back to factory default settings. Resetting a router is different than rebooting a router. Unplugging a router from the wall reboots it. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. A router reset will affect the following settings:

  • The router's username and password are reset.
  • All WiFi settings are reset, including network name and password.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Trendnet TV-IP100W-Nv3 Guides

This is the reset router guide for the Trendnet TV-IP100W-Nv3. We also have the following guides for the same router:

Recover Password in Trendnet TV-IP100W-Nv3

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Trendnet TV-IP100W-Nv3

You can usually find a small reset button on either the back or the bottom of a router. This is what a typical reset button looks like:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Remember, this will erase everything you have previously done to this Trendnet TV-IP100W-Nv3 router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Trendnet TV-IP100W-Nv3

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Our TV-IP100W-Nv3 Login Guide has all of the information that you need.

Change Your Password

Be sure to change your router's default password after you get logged back in. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Trendnet TV-IP100W-Nv3 Guides

This isn't our only Trendnet TV-IP100W-Nv3 guide. We also have the following guides for this router.

This is the reset router guide for the Trendnet TV-IP100W-Nv3. We also have the following guides for the same router: