Setup Router logo in white Setup router name logo in white
Get Software

Reset the Trendnet TV-IP100Wv3

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

In this article, you will learn how to reset your Trendnet TV-IP100Wv3 back to factory settings. This is not the same thing as rebooting a router. Every time your router loses power it reboots. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:

  • The router's login credentials are reset to factory defaults.
  • Your WiFi login, password, and network name are reset.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Trendnet TV-IP100Wv3 Guides

This is the reset router guide for the Trendnet TV-IP100Wv3. We also have the following guides for the same router:

Recover Password in Trendnet TV-IP100Wv3

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Trendnet TV-IP100Wv3

There is usually a small reset button located on either the back or the bottom of a router. Look for something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. It is harmless to hold the reset button too long.

Just don't forget that this will totally reset your Trendnet TV-IP100Wv3 router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the Trendnet TV-IP100Wv3

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. We have a TV-IP100Wv3 Login Guide with all this information ready for you.

Change Your Password

Be sure to change your router's default password after you get logged back in. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Trendnet TV-IP100Wv3 Guides

We have collected a lot of information about the Trendnet TV-IP100Wv3 router. You can find some of our additional content here.

This is the reset router guide for the Trendnet TV-IP100Wv3. We also have the following guides for the same router: