Setup Router logo in white Setup router name logo in white
Get Software

Reset the Trendnet TV-IP121W

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the Trendnet TV-IP121W router back to factory default settings. This is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:

  • The router's login and password are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Trendnet TV-IP121W Guides

This is the reset router guide for the Trendnet TV-IP121W. We also have the following guides for the same router:

Recover Password in Trendnet TV-IP121W

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Trendnet TV-IP121W

There is usually a small reset button located on either the back or the bottom of a router. Look for something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Don't forget, this step will totally reset your Trendnet TV-IP121W router back to factory settings.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Trendnet TV-IP121W

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the TV-IP121W Login Guide to find everything that you need to log in.

Change Your Password

After logging in, you should really change your router's password for added security. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Trendnet TV-IP121W Guides

This isn't our only Trendnet TV-IP121W guide. We also have the following guides for this router.

This is the reset router guide for the Trendnet TV-IP121W. We also have the following guides for the same router: