Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Trendnet TV-IP201P router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Trendnet TV-IP201P router.

Other Trendnet TV-IP201P Guides

This is the ip address guide for the Trendnet TV-IP201P. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Trendnet TV-IP201P

To get started configuring the Trendnet TV-IP201P LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Trendnet TV-IP201P, follow our Trendnet TV-IP201P Login Guide.

Change the LAN IP Address on a Trendnet TV-IP201P

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Trendnet TV-IP201P router.

Once you have decided to change your LAN IP Address, the address you are looking at when you are inside your network, first log into the TRENDnet TV-IP201P. This takes you to the Information page. Second, click the choice on the left side of the page labeled Network

Configure the LAN section of your Trendnet TV-IP201P

router setup
This is the setup page from your Trendnet TV-IP201P router.

On this new page, in the first section, labeled IP Assignment. Go ahead and click the bullet labeled Use Static address, then place your cursor in the first of the four boxes labeled IP Address. This is where you enter the new address you have chosen for your Router. One good suggestion is to use the address of 192.168.1.1

Make sure, and do not change the Subnet Mask, this should stay at 255.255.255.0

Finally, when you are done, click Save.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Trendnet TV-IP201P Info

Don't forget about our other Trendnet TV-IP201P info that you might be interested in.

This is the ip address guide for the Trendnet TV-IP201P. We also have the following guides for the same router: