Reset the Trendnet TV-IP422W

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

In this article, you will learn how to reset your Trendnet TV-IP422W back to factory settings. This is not the same thing as rebooting a router. A reboot happens every time a router loses power. However, when you reset a router you, return it back to its factory default settings.

Warning: Proceed with caution; resetting your router can be a major headache. When you reset your router, the following will happen.

  • The router's login credentials are reset to factory defaults.
  • All WiFi information such as network name, password, and authentication method are erased.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Trendnet TV-IP422W Guides

This is the reset router guide for the Trendnet TV-IP422W. We also have the following guides for the same router:

Recover Password in Trendnet TV-IP422W

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Trendnet TV-IP422W

There is usually a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Keep in mind that this will completely reset your Trendnet TV-IP422W router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Trendnet TV-IP422W

Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a TV-IP422W Login Guide with all this information ready for you.

Change Your Password

After logging in, you should really change your router's password for added security. The factory default passwords for routers are very well known. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Trendnet TV-IP422W Guides

Here are some of our other Trendnet TV-IP422W guides that you might be interested in.

This is the reset router guide for the Trendnet TV-IP422W. We also have the following guides for the same router: