Setup Router logo in white Setup router name logo in white
Get Software

Reset the Trendnet TW100-S4W1CA

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

In this article, you will learn how to reset your Trendnet TW100-S4W1CA back to factory settings. A router reset is very different than a router reboot. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:

  • The router's login credentials are reset to factory defaults.
  • Your WiFi login, password, and network name are reset.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any parental controls, firewall settings, or port forwards will be removed.

Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Trendnet TW100-S4W1CA Guides

This is the reset router guide for the Trendnet TW100-S4W1CA vG. We also have the following guides for the same router:

Recover Password in Trendnet TW100-S4W1CA

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Trendnet TW100-S4W1CA

On most routers you can find a small button on the back or the bottom labeled reset. Look for something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You can hold the button down as long as you like, it will not hurt anything.

Don't forget, this step will totally reset your Trendnet TW100-S4W1CA router back to factory settings.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Trendnet TW100-S4W1CA

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Our TW100-S4W1CA Login Guide has all of the information that you need.

Change Your Password

Do not forget to change your router's default password when you log back into it. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Trendnet TW100-S4W1CA Guides

This isn't our only Trendnet TW100-S4W1CA guide. We also have the following guides for this router.

This is the reset router guide for the Trendnet TW100-S4W1CA vG. We also have the following guides for the same router: