This article covers how to reset the VDC VNPT-Net router back to factory default settings. This is a much bigger deal than a router reboot. A reboot happens every time a router loses power. However, when you reset a router you, return it back to its factory default settings.
Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:
- The router's username and password are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- All ISP settings will reset to default, and you may have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other VDC VNPT-Net Guides
Use a VPN
Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the VDC VNPT-Net. We also have the following guides for the same router:
Recover Password in VDC VNPT-Net
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the VDC VNPT-Net
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
There is usually a small reset button located on either the back or the bottom of a router. Most reset buttons look like this:
Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Hold the reset button down for 10 seconds and watch the lights. The blinking pattern of the lights on the front of the router should change when the reset is complete. It is harmless to hold the reset button too long.
Keep in mind that this will completely reset your VDC VNPT-Net router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the VDC VNPT-Net
Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can follow the VNPT-Net Login Guide to find everything that you need to log in.
Change Your Password
After logging in, you should really change your router's password for added security. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other VDC VNPT-Net Guides
This isn't our only VDC VNPT-Net guide. We also have the following guides for this router.
This is the reset router guide for the VDC VNPT-Net. We also have the following guides for the same router: