This guide shows you how to reset your Verizon FiOS Quantum Gateway router. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:
- The router's login and password are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Verizon FiOS Quantum Gateway Guides
This is the reset router guide for the Verizon FiOS Quantum Gateway. We also have the following guides for the same router:
Recover Password in Verizon FiOS Quantum Gateway
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Verizon FiOS Quantum Gateway
Usually there is a reset button located on the back or bottom of a router. A typical reset button looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will erase everything you have previously done to this Verizon FiOS Quantum Gateway router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Verizon FiOS Quantum Gateway
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can find all of the information that you need in our FiOS Quantum Gateway Login Guide.
Change Your Password
Do not forget to change your router's default password when you log back into it. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Verizon FiOS Quantum Gateway Guides
We have collected a lot of information about the Verizon FiOS Quantum Gateway router. You can find some of our additional content here.
This is the reset router guide for the Verizon FiOS Quantum Gateway. We also have the following guides for the same router: