How to change the IP Address on a vividwireless WIXFMR-107 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the vividwireless WIXFMR-107 router.

Other vividwireless WIXFMR-107 Guides

This is the ip address guide for the vividwireless WIXFMR-107.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The vividwireless WIXFMR-107

To get started configuring the vividwireless WIXFMR-107 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the vividwireless WIXFMR-107, follow our vividwireless WIXFMR-107 Login Guide.

Change the LAN IP Address on a vividwireless WIXFMR-107

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your vividwireless router.

After logging into the vividwireless WIXFMR-107 you start on the Status page. When you need to change your Router IP Address, the address of your Router that you see when inside your network, click the choice in the upper right corner labeled Networking, then on the left side bar in grey labeled LAN.

Configure the LAN section of your vividwireless WIXFMR-107

router setup
This is the setup page from your vividwireless router.

You are now on the right page. Place your cursor in the first box labeled LAN IP Address. Enter your new address you have chosen for your Router. We suggest 192.168.0.1

The other setting on this page is the LAN netmask, leave this alone, it should remain at 255.255.255.0

When you are finished, click Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other vividwireless WIXFMR-107 Info

Don't forget about our other vividwireless WIXFMR-107 info that you might be interested in.

This is the ip address guide for the vividwireless WIXFMR-107.We also have the following guides for the same router: