In this article, you will learn how to reset your Wavlink RCUS-WN530K2 back to factory settings. This is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. A Router Reset completely erases the router and returns it to factory settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. A router reset will affect the following settings:
- The router's username and password are reset.
- Your WiFi login, password, and network name are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Wavlink RCUS-WN530K2 Guides
This is the reset router guide for the Wavlink RCUS-WN530K2 M30K2_V3130.210301. We also have the following guides for the same router:
Recover Password in Wavlink RCUS-WN530K2
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Wavlink RCUS-WN530K2
You can usually find a small reset button on either the back or the bottom of a router. What you are looking for is something that looks like this:
Your reset button may look different, but usually they are very small. You may need a paper clip to push the reset button.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. After a few seconds the lights should blink differently. When this happens, the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Remember, this will erase everything you have previously done to this Wavlink RCUS-WN530K2 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Wavlink RCUS-WN530K2
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the RCUS-WN530K2 Login Guide to find everything that you need to log in.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Wavlink RCUS-WN530K2 Guides
We have collected a lot of information about the Wavlink RCUS-WN530K2 router. You can find some of our additional content here.
This is the reset router guide for the Wavlink RCUS-WN530K2 M30K2_V3130.210301. We also have the following guides for the same router: