This page shows how to change the LAN IP Address on the Westell G90-610060-20 router.
Other Westell G90-610060-20 Guides
This is the ip address guide for the Westell G90-610060-20. We also have the following guides for the same router:
- Westell G90-610060-20 - Reset the Westell G90-610060-20
- Westell G90-610060-20 - Westell G90-610060-20 User Manual
- Westell G90-610060-20 - Westell G90-610060-20 Login Instructions
- Westell G90-610060-20 - Information About the Westell G90-610060-20 Router
- Westell G90-610060-20 - Westell G90-610060-20 Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Westell G90-610060-20
To get started configuring the Westell G90-610060-20 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Westell G90-610060-20, follow our Westell G90-610060-20 Login Guide.
Change the LAN IP Address on a Westell G90-610060-20
If you followed our login guide above then you should see this screen.
Once you have logged into the Westell G90-610060-20 you are going to see the Home page for this Router. When you need to change your IP Address, the address of your Router that you see when inside your network, click the Advanced tab at the top of the page. Then, below that, LAN.
Configure the LAN section of your Westell G90-610060-20
On this page, find the box labeled Modem IP Address. This is the box that you enter your new address in. One good choice for your Router is 192.168.0.1
Please be sure that you don't change the Subnet Mask, this should remain at 255.255.255.0
Finally, click the blue button at the bottom of the page labeled Save.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Westell G90-610060-20 Info
Don't forget about our other Westell G90-610060-20 info that you might be interested in.
This is the ip address guide for the Westell G90-610060-20. We also have the following guides for the same router:
- Westell G90-610060-20 - Reset the Westell G90-610060-20
- Westell G90-610060-20 - Westell G90-610060-20 User Manual
- Westell G90-610060-20 - Westell G90-610060-20 Login Instructions
- Westell G90-610060-20 - Information About the Westell G90-610060-20 Router
- Westell G90-610060-20 - Westell G90-610060-20 Screenshots