This is the reset guide for the Zhone ZNID-GPON-2428B1-0ST router. A router reset is very different than a router reboot. Unplugging a router from the wall reboots it. This is different from a reset because a reset completely erases all settings from the router.
Warning: Proceed with caution; resetting your router can be a major headache. When you reset your router, the following will happen.
- The router's username and password are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- All ISP settings will reset to default, and you may have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Zhone ZNID-GPON-2428B1-0ST Guides
This is the reset router guide for the Zhone ZNID-GPON-2428B1-0ST S4.1.258 STC. We also have the following guides for the same router:
Recover Password in Zhone ZNID-GPON-2428B1-0ST
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Zhone ZNID-GPON-2428B1-0ST
There is usually a small reset button located on either the back or the bottom of a router. Look for something that looks like this:
Your reset button may look different, but usually they are very small. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. It is harmless to hold the reset button too long.
Keep in mind that this will completely reset your Zhone ZNID-GPON-2428B1-0ST router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Zhone ZNID-GPON-2428B1-0ST
Now you need to log in using the factory default username and password. Our ZNID-GPON-2428B1-0ST Login Guide has all of the information that you need.
Change Your Password
Do not forget to change your router's default password when you log back into it. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Zhone ZNID-GPON-2428B1-0ST Guides
Here are some of our other Zhone ZNID-GPON-2428B1-0ST guides that you might be interested in.
This is the reset router guide for the Zhone ZNID-GPON-2428B1-0ST S4.1.258 STC. We also have the following guides for the same router: