This page shows how to change the LAN IP Address on the Zioncom IP0143 router.
Other Zioncom IP0143 Guides
This is the ip address guide for the Zioncom IP0143. We also have the following guides for the same router:
- Zioncom IP0143 - Reset the Zioncom IP0143
- Zioncom IP0143 - Zioncom IP0143 User Manual
- Zioncom IP0143 - Zioncom IP0143 Login Instructions
- Zioncom IP0143 - How to change the DNS settings on a Zioncom IP0143 router
- Zioncom IP0143 - Information About the Zioncom IP0143 Router
- Zioncom IP0143 - Zioncom IP0143 Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Zioncom IP0143
To get started configuring the Zioncom IP0143 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Zioncom IP0143, follow our Zioncom IP0143 Login Guide.
Change the LAN IP Address on a Zioncom IP0143
If you followed our login guide above then you should see this screen.
Now that you have logged into the Zioncom IP0143 you see the Status page of the Router. To change your IP Address, the address you see when inside your network, click the tab at the top of the page labeled Basic Setup. Then under this, in the white bar, click LAN/DHCP Setup.
Configure the LAN section of your Zioncom IP0143
You should now be on the correct page. Place your cursor in the first of the four boxes labeled System IP Address. Enter your new address in these four boxes. One good address for your Zioncom Router is 192.168.1.1
Make sure you do not change the Subnet Mask, this should remain at 255.255.255.0
Finally, make sure to save before you exit.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Zioncom IP0143 Info
Don't forget about our other Zioncom IP0143 info that you might be interested in.
This is the ip address guide for the Zioncom IP0143. We also have the following guides for the same router:
- Zioncom IP0143 - Reset the Zioncom IP0143
- Zioncom IP0143 - Zioncom IP0143 User Manual
- Zioncom IP0143 - Zioncom IP0143 Login Instructions
- Zioncom IP0143 - How to change the DNS settings on a Zioncom IP0143 router
- Zioncom IP0143 - Information About the Zioncom IP0143 Router
- Zioncom IP0143 - Zioncom IP0143 Screenshots