This page shows how to change the LAN IP Address on the Zioncom IP0803 router.
Other Zioncom IP0803 Guides
This is the ip address guide for the Zioncom IP0803. We also have the following guides for the same router:
- Zioncom IP0803 - Zioncom IP0803 User Manual
- Zioncom IP0803 - Zioncom IP0803 Login Instructions
- Zioncom IP0803 - How to change the DNS settings on a Zioncom IP0803 router
- Zioncom IP0803 - Information About the Zioncom IP0803 Router
- Zioncom IP0803 - Zioncom IP0803 Screenshots
- Zioncom IP0803 - Reset the Zioncom IP0803
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Zioncom IP0803
To get started configuring the Zioncom IP0803 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Zioncom IP0803, follow our Zioncom IP0803 Login Guide.
Change the LAN IP Address on a Zioncom IP0803
If you followed our login guide above then you should see this screen.
To change your Router IP Address, the address of your Router that you can see from inside your network, first log into the Zioncom IP0803. This places you on the Status page of this Router. Next, click Basic Setup, then below that, LAN/DHCP Setup.
Configure the LAN section of your Zioncom IP0803
You are now on the correct page. Place your cursor in the first of the four boxes labeled System IP Address and enter your new address in these boxes. For your Router one good choice is the address of 192.168.1.1
Make sure to save before you exit. Also make sure that you did not change the Subnet Mask, this should remain at 255.255.255.0
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Zioncom IP0803 Info
Don't forget about our other Zioncom IP0803 info that you might be interested in.
This is the ip address guide for the Zioncom IP0803. We also have the following guides for the same router:
- Zioncom IP0803 - Zioncom IP0803 User Manual
- Zioncom IP0803 - Zioncom IP0803 Login Instructions
- Zioncom IP0803 - How to change the DNS settings on a Zioncom IP0803 router
- Zioncom IP0803 - Information About the Zioncom IP0803 Router
- Zioncom IP0803 - Zioncom IP0803 Screenshots
- Zioncom IP0803 - Reset the Zioncom IP0803