Setup Router logo in white Setup router name logo in white
Get Software

Reset the Zonet ZSR0104CP

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the Zonet ZSR0104CP router back to factory default settings. A router reset is very different than a router reboot. A reboot happens every time a router loses power. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. A router reset will affect the following settings:

  • The router's username and password are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any parental controls, firewall settings, or port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Zonet ZSR0104CP Guides

This is the reset router guide for the Zonet ZSR0104CP. We also have the following guides for the same router:

Recover Password in Zonet ZSR0104CP

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Zonet ZSR0104CP

There is usually a small reset button located on either the back or the bottom of a router. What you are looking for is something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. It is harmless to hold the reset button too long.

Remember, this will erase everything you have previously done to this Zonet ZSR0104CP router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Zonet ZSR0104CP

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the ZSR0104CP Login Guide to find everything that you need to log in.

Change Your Password

You need to change your router's default password after you log in for the first time. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Zonet ZSR0104CP Guides

If you want additional help with your Zonet ZSR0104CP be sure to check out some of our other guides.

This is the reset router guide for the Zonet ZSR0104CP. We also have the following guides for the same router: