This guide shows you how to reset your Zoom 5350 router to factory default settings. A router reset is very different than a router reboot. Rebooting a router is simply turning it off and back on again. This is different from a reset because a reset completely erases all settings from the router.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:
- The router's login and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Zoom 5350 Guides
This is the reset router guide for the Zoom 5350. We also have the following guides for the same router:
Recover Password in Zoom 5350
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Zoom 5350
On most routers you can find a small button on the back or the bottom labeled reset. Look at your router and try to find something that looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Just don't forget that this will totally reset your Zoom 5350 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Zoom 5350
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the 5350 Login Guide to find everything that you need to log in.
Change Your Password
Do not forget to change your router's default password when you log back into it. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Zoom 5350 Guides
If you want additional help with your Zoom 5350 be sure to check out some of our other guides.
This is the reset router guide for the Zoom 5350. We also have the following guides for the same router: